A wind farm can consist of different assets such as Wind Turbines, Foundations, Inter-array and Export Cables as well as Substations. This article contains ...
This article contains information on how to add and edit your Wind turbines - information on the different data inputs can be found in this article. Click ...
Wind turbines (WTGs) offer a wide range of input data to cover any use case. Input data varies between Shoreline Design Construction and Shoreline Design O&...
Substations are offshore installations that work as "power hubs". They have the purpose of collecting, transforming and exporting the power genera...
There are several input values for a substation. Some are the same for O&M Design™ and Con Design™. These are: members, parameters and weather. Click ...
The cables that are used in an offshore wind farm are grouped into: Inter array cables Export cables The power that is generated by the turbines is tra...
This article contains information about the input data for both cables and burial cables, what your options are, and an explanation for each input Click th...
There are two ways to add grouting to your case: Use a single HLV and add grouting as part of the WTG installation process: Model the time required for...
This article contains information on how to add and edit your Jackets - information on the different data inputs can be found in this article. Click the...
There are several input values for a jacket. Some are the same for O&M Design™ and Con Design™. These are: members, parameters and weather. Click the ...
